Question 1

How much does it cost to replace a whole AC unit?

Accepted Answer

The cost of replacing a whole AC unit ranges from $3,000 to $7,000, with the average being $5,000. This equates to between $25 to $60 per square foot. Prices are determined by the size and brand of the HVAC system, the size of the house, the length of the ductwork and the efficiency rating of the new unit.

Question 2

What size air conditioner do I need for my home?

Accepted Answer

The size of your air conditioner is determined by the size of your home and the location of your unit. A good rule of thumb is each square foot of living area in your house requires 20 BTU from your air conditioner. Other factors, like windows and ceiling height, can influence whether you require more or fewer BTUs per square foot. The majority of units will range from 5,000 to 12,500 BTU.

Question 3

Can I finance my new air conditioning system installation?

Accepted Answer

Yes, you can get financing for an HVAC repair or purchase. Precision Heating & Cooling is delighted to partner with a number of financing companies to meet your individual needs.

Question 4

Are there any rebates or incentives for installing an energy-efficient AC?

Accepted Answer

Yes, there are often rebates or incentives available for installing an energy-efficient AC unit. These programs are typically offered by government agencies, utility companies, and manufacturers to encourage energy savings and reduce carbon footprints. Eligibility may depend on the specific energy efficiency rating of the AC unit, such as those certified by ENERGY STAR. To find available rebates or incentives, check with your local utility company, government energy office, or the AC manufacturer's website for current offers and eligibility requirements.

Question 5

How long does AC installation take?

Accepted Answer

AC installation typically takes between 4 to 8 hours, depending on the complexity of the job. Simple replacements in homes with existing ductwork and compatible systems may be on the lower end of this range. However, if the installation involves extensive ductwork modifications, upgrades to electrical systems, or the setup of a completely new system in a home without previous air conditioning, it can extend towards the higher end. Each project varies, so consulting with your installation professional for a more accurate estimate is advisable.

Question 6

How long does an AC unit last?

Accepted Answer

An AC unit typically lasts between 10 to 15 years, depending on factors like usage, maintenance, and local climate conditions. Regular maintenance, including annual servicing, cleaning or replacing filters, and checking refrigerant levels, can help extend the lifespan of your unit. Additionally, promptly addressing any repairs and ensuring the system is properly sized for your home contribute to its longevity. High-quality units and those with higher SEER ratings often have a longer operational life.

Question 7

Is it worth replacing a 20-year-old furnace?

Accepted Answer

Furnaces that are 20 years or older lose efficiency over time, crack, and leak, putting you and your family at risk. If your furnace is between 16 and 20 years old and frequently fails, you really should think about replacing it.

Question 8

How much does it cost to fix a furnace heating problem near Greenville?

Accepted Answer

Furnaces come in three main categories, with the primary distinction being the fuel used to produce heat: electric, gas (including propane), and oil. Each type of furnace has a slightly different cost for repairs. An electric furnace typically costs between $50 and $300 to repair. You might have to pay more for gas, oil, or propane-powered furnaces; typical furnace service costs range from $300 to $1,200.

Question 9

Why is my furnace running but not heating the house?

Accepted Answer

To begin, you should take a look at the thermostat. The fan switch should be near the bottom of your thermostat. The toggle switch has two positions: ON and AUTO. When the fan is turned on, it constantly blows air through the house. As a result, you may notice cold air coming from the vents. When the switch is set to auto, the fan will only turn on when the air has reached the desired temperature. To prevent cool air from entering your home, set the thermostat's fan switch to auto.

The air filter should be checked next. If you can't remember the last time you changed the furnace filter, it is most likely too dirty to allow the furnace to function properly. A clogged air filter can obstruct airflow over the heat exchanger, causing it to overheat. For safety reasons, the high-limit switch will be tripped at this point, and the burners will be turned off. Change your air filter once a month to improve indoor air quality and avoid furnace problems.

If everything looks good with your filter and thermostat, you should next check the pilot light. Older furnaces are powered by a standing pilot light. The pilot light may be extinguished and must be re-lit in order for the burners to produce heat. If you don't see a blue flame near the bottom of your furnace, you'll need to access the reset switch and light the pilot again with a lighter.

Finally, inspect the condensate line. When newer, high-efficiency furnaces run, they produce water. This excess moisture is then drained via a drain line. If the line becomes clogged, the water will return to the furnace, tripping the overflow kill switch and shutting down the furnace.

$10 Donation
With Maintenance Package

Honea Path SC Heating and Cooling

Recent Jobs and Reviews in Honea Path, SC

Our Local Reviews by City

Job Locations and Reviews

Our Greenville Customers Say it Best:

Precision Greenville is here to help you!